Denon AVR4310CI 7 1 Channel Multi Zone Home Theater Receiver with Networking Capability and 1080p HDMI Connectivity

Denon AVR4310CI 7 1 Channel Multi Zone Home Theater Receiver with Networking Capability and 1080p HDMI Connectivity

Discover a whole new world of multi-channel surround sound with Denon’s AVR-4310CI A/V receiver, which is among the first to include Dolby’s Pro Logic IIz decoder, which provides for front height channels to dramatically expand the front channels’ soundstage. The highest resolution audio decoders are provided, including Dolby TrueHD and DTS-HD Master Audio for the ultimate in audio fidelity. Audyssey’s dynamic sound expansion system provides derived front height or front wide width channels for the most immersive surround sound experience. Analog and digital video sources are upconverted via Anchor Bay VRS processing to HD quality, and the AVR-4310CI features no less than six HDMI inputs along with two parallel HDMI outputs. The Audyssey MultEQ XT room acoustic correction system features a supplied microphone that measures and corrects speaker/room response for up to eight measurement points, and the dynamic volume and dynamic EQ systems provide rich, extended response at any volume level with no annoying volume jumps during commercials. With XM and Sirius satellite radio options, the AVR-4310CI also features built-in HD radio for dramatically improved fidelity.

User Ratings and Reviews

4 Stars Great receiver, excellent audio and video, but software bugs..
I got this only 2 weeks ago, so this is a preliminary report:

From my testing so far:

Pros:

1. Great sound; drastic (positive) improvement over previous Denon 1508 I had in this setup.

2. Video: The upconversion from any source to HDMI is good and works without a hassle. (The worst case testing of standard cable to 1080p doesn’t look good and is more grainy than I would have liked; but standard DVD looks fantastic on my Panasonic 1080p plasma with this receiver).

3. Audussey setup: was quite easy (just took some 10 minutes) and once done, had done a good job of measuring distances and capacities of speakers I have (Martin Logan Aeons for the front, Vignette for the center, ML Grotto for the sub, but a low end polk audio for surrounds in my 5.1 setup), and correctly set the relative power etc for the speakers. I can see the difference in one of the side chairs in my listening setup.

4. On screen GUI: Great improvement over my previous Denon/Marantz etc. Again this works flawlessly, and the GUI, while it can be improved, is good enough for most people.

5. The remote: the primary remote, after you get used to it, is great. Now I could dispose of my Panasonic TV remote as well as my DVD player’s remotes and just use one remote effortlessly. I also have a Harmony remote that I stopped using long time ago, and this remote is better than the harmony remote in my experience (one simple reason is that harmony remembers the state of the equipment and expects you to use only the remote always; so if you do manual change, for e.g, walk up to the TV and switch it on, harmony gets confused!). Again a great improvement over previous/lower end Denon models.

5. Network access/firmware upgrade: just having these features is a plus (BUT…I had lot of issues with this – that I am covering below)

6. Ipod direct connectivity using front USB input: great again. (I was able to connect both iphone first gen and a ipod video 5th gen as well as a ipod nano 3rd gen and use them correctly using the onscreen menu). There is an audio improvement mode that improves the compressed mp3 music (“Restorer” – has 4 modes – off or no processing, 64, 96bit and HQ – high quality?)

7. Several inputs – 6 HDMI inputs there is even a set of front inputs – hdmi, composite,USB inputs for convenience.

8. Doesn’t get too hot! I tried pushing this – a higher volume on my sub-4 ohm Martin Logans and no sweat! Receiver does get hot but not too hot that you will burn your fingers! This is one big reason I bought this receiver – my experience with other brand rececivers was quite bad – at 75-90 watt/channel, these receivers trip my house fuses frequently; Denon (both my old 1508 at 75 watts and 4310 now at 130 watts) does admirably well in this regard and I have no complaints – only superlative praises for the efficiency and power handling of Denon.

Now for the CONS and the problems I encountered:

1. Poor, unfinished, mediocre web access – while it does allow you to change the source, do the setup of components, control multi zones, volume control etc using [...] (browser) access), it looks very primitive – not one that you expect in a 2000$ receiver.

2. NET/USB and other network Modes: Several bugs here – let me try a few,, but I am not finished finding them yet!

a. Doesn’t recognize any NAS drives in the home network; only sees Windows media servers in the network! So to play music in a NAS drive, I have to first add it to a WMP library and then I can play that from Denon. This is more a feature request than a bug.

b. While navigating through list of songs/albums etc, there is no page up/page down keys and so going down one entry at a time and lack of search is a pain when you have thousands of songs.

c. There is a minor bug in playing media server/USB files: while the display goes to sleep after a minute or so, the album art stays in the screen in the same place – this will be bad for plasma TVs!

d. Ipod troubles: I have a first generation iphone and so when I connect that, there is a warning on iphone that says this device is not compatible and so I should put the phone in airplane mode. Say no to this screen and it continues to work normally! Not sure if it is apple’s bug or denon’s bug! But Denon is recognizing older ipods to current generation.

Quite a few problems I saw with NET/USB/Media server/internet radio have been solved with the firmware updates over the last month..

I want to give 4.5 stars, only because most of the problems I saw can be fixed by software updates (I hope Denon will act fast), and the rest, the most important thing for me – audio quality, video quality, power handling – are worth 6 stars.

I haven’t got to testing Audussey DSX – the height and wider channel features presented by this receiver. I will update this review as I test more features…

5 Stars It is a Denon, consistant sound quality from product-to-product
This is to share my experience with a new 4310CI for a week:

PRICE – I just upgraded to this 4310CI from an old Denon AVR3801 which has 7x110W. From all the articles I’ve read which indicated 4310CI is more likely an upgrade of the 3808CI instead of 4308CI, and price was raised form the 1699 for 3808CI to the 1999 MSRP. However, I had the 4310 for 1248 ([...].) I paid ~800 for the 3801 in 2001. I think 1248 for the 4310CI is alright as of this time.

AUDIO – 1) In stereo mode, I cannot tell of an improvement immediately over the old 3801. However, 4310CI’s HD radio locks in more stations (with the 4310CI, signal dropout completely if signal quality is poor) and offers pleasant radio listening experience. I don’t have XM and Sirius satellite; therefore, I cannot share any experience for those. 2) In AV mode, 4310CI does differently sensationally and somehow better than 3801; however, 3801 is doing great basic 5.1 decoding, IMO. No need to upgrade to 4310CI just for this if I am not looking for HDMI connections. 3) The internet radio is cool, and sound quality is not bad. However, it froze on me a few times thus far; power cycle brought it right back.

VIDEO – 1) no HDMI handshake issue so far with my LN52A750, and 1080P really does significantly better job than 1080i via component cables with my old 3801. 2) ABT-2010 does a super job up-scaling my DVD’s 480i and 480p output. IMO, it does the best up-scaling job (very SMOOTH, although yet Bluray quality) while PS3 does good job and LN52A750 does poorly. This alone would make 4310CI a good buy if you don’t have a higher end DVD or Bluray player.

OTHER – 4310CI gets kind of hot. My 3808 is running cool to touch from the top, no heat at all. I was concerned about the heat when I first had the 4310CI all connected and ran for just about 15 minutes in -30db. Don’t know if this normal; however, user manual does say it would get hot and it needs room for ventilation.

It is somewhat expensive; however, I’d recommend this 4310CI for the price I paid for.

UPDATE:

I think my 4310CI ran hot was due to vedio processing from up-scaling 480p DVD input. I checked again yesterday while I was watching 1080i input from DirecTV, it stayed warm although not cool but not hot.

Audio signal comes right in at power-up and dropout while syncing with video via HDMI. Video wouldn’t show on TV at least for the first 3-5 seconds. This only happens at start-up, have not run into a similar situation while watching DirecTV, DVD, or with a PS3.

3 Stars Denon Receivers Signal Drop Out Problems with TVs
Can anyone comment if the new Denon receiver has resolved its signal dropping out problems with other TVs, especially Sony XBR6? I know many potential Denon buyers woild have this concern too.

I am interested in buying this Denon 4310Ci receiver. However, I am still hesitated because of its signal dropping out problem with many TV especially Sony’s. The problem was raised by Thang Nguyen in Amazon for Denon 2809Ci and I comment it at the following link.

http://www.amazon.com/review/R3HKJHEXPM4AQ8/ref=cm_aya_cmt?ie=UTF8&ASIN=B001CSEZVY#wasThisHelpful

However, it did not bring up enough attention. For further discussions of the problem please go to following forum and Youtube to see the problem:

[...]

Buy/More Info

Filed under: Electronics

Like this post? Subscribe to my RSS feed and get loads more!

Possibly related posts